The TXA60-200 Type Cooling Fan Is Used in the Charging Pile Industry

Case Background

With the fast charging power of electric vehicles exceeding 400kW, the heat generated by the IGBT modules and capacitor banks inside the charging piles has soared, and the traditional natural heat dissipation methods can no longer meet the demands. A certain charging pile enterprise's actual measurement shows that for every 10℃ increase in module temperature, the failure rate rises by 30%, and a forced cooling solution is urgently needed.

The core advantages of the 20060 fan

High-efficiency heat dissipation design: 200mm large diameter +60mm thick body structure, combined with 7-blade sickle-shaped fan blades, the air volume reaches 250CFM, which is 40% higher than the conventional model.

Environmental adaptability: IP54 protection level and wide temperature range support from -30℃ to 70℃, suitable for outdoor sand, dust, rain and snow environments.

Intelligent linkage: Built-in PWM speed regulation function, which can automatically adjust the rotational speed (800-3000RPM) according to the module temperature, reducing power consumption by 25%.

Long-term stability: Utilizing ceramic bearing technology, it offers 50,000 hours of trouble-free operation, matching the 8-year design life of charging piles.

Application effectiveness

In a 120kW DC pile project in East China, after replacing the original heat dissipation scheme:
The temperature of the core component dropped by 18℃, and the peak power duration was extended by 2.3 times.
The faulty work orders caused by overheating decreased by 52%.
The comprehensive energy consumption has been reduced by 12%, and the annual electricity bill savings exceed 2,800 yuan per charging pile.
This model has become a standard component for liquid-cooled ultra-fast charging piles, with a market penetration rate of 67%.